audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing temperature sensor G18 > < Removing and installing (replacing)
Affixing auxiliary heater rating plate to housing with heat exchanger
Affixing auxiliary heater rating plate to housing with heat exchanger
   
–  After assembling burner unit, check information on rating plate -A-, paying particular attention to the type of fuel indicated.
  Note
t  The design of the burner element differs for the two types of fuel “Petrol” and “Diesel” → Chapter.
t  The version is indicated on the rating plate -A- of the heaters:
t  Type “912- D” = Auxiliary heater (with supplementary heater; for vehicles with diesel engine only)
t  Type “912- B” = Auxiliary heater (for vehicles with petrol engine only)
t  Information on the year of initial commissioning of the auxiliary heater is also given.
t  A second rating plate (duplicate) is provided in the engine compartment. In cases of doubt concerning the type of auxiliary heater, always refer to the rating plate affixed to the actual auxiliary heater.
  A82-0401

Removing and installing temperature sensor G18 > < Removing and installing (replacing)