| With the auxiliary heater installed, unfasten the coolant expansion tank cap (to depressurise the coolant circuit). |
| –
| Pinch off the two coolant hoses to the auxiliary heater or have a suitable plug to hand (temperature sensor is positioned directly in coolant). |
| –
| Pull temperature sensor -A- out of mount in auxiliary heater housing. |
| –
| Seal mount in auxiliary heater if necessary. |
Note | t
| The temperature sensor -A- is held in position in the auxiliary heater housing by the cover for the sensors. |
| t
| The temperature sensor -A- is part of the wiring harness and cannot be replaced separately at present. |
|
|
|
