audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing air-recirculation flap control motor -V113 > < Removing and installing temperature flap control motor, left -V158

A4 Mk2

Heating
Components for control of heater
Removing and installing central flap control motor -V70
 
A87-0439

Removing

  • ‒ Remove glove box.

=> General Body Repairs, Interior; Repair Group 68

  • ‒ → Unplug connector -A-.
  • ‒ Screw out bolts -B-.
  • ‒ Detach control motor.

Installing

Note:
 
A87-0440

Cam plate at control motor is colour-coded. For control motor -V70 it is white (black for RHD).

  • ‒ → Insert both lugs -A- and -B- in groove -C- of cam plate.

Re-install all parts removed in reverse order, paying attention to the following:

  • ‒ Lay wiring harness so that it cannot come into contact with moving components (e.g. control motor lever).
  • ‒ Interrogate .

Note:

Operation of control motor can be checked in the following manner, for example:

Connect both contacts "5" and "6" in connector of control motor to 12V DC voltage source; control motor moves in one direction as far as stop; interchanging positive and negative alters direction of rotation. Use adapter cable for this purpose => Page 80-28.

Removing and installing air-recirculation flap control motor -V113 > < Removing and installing temperature flap control motor, left -V158