audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Detaching heating elements and air ducts from heater/attaching > < Dismantling and assembling heater

A4 Mk2

Heating
Dismantling and assembling heater
Detaching electrical add-on components from heater / re-attaching
  • Heater
    • ◆ Removing and installing=>Page 80-79
    • ◆ Detaching/attaching heating elements and air ducts=>Page 80-96
    • ◆ Dismantling and assembling =>Page 80-99
 
A80-0215
  • Temperature flap control motor, left
    -V158
    • ◆ With temperature flap control motor potentiometer, left -G220
    • ◆ Lever colour code: Red (yellow for RHD)
    • ◆ Removing and installing=>Page 80-32
  • Bolt
  • Vent temperature sender, left footwell -G261
    • ◆ Removing and installing=>Page 80-26
  • Vent temperature sender, right footwell -G262
    • ◆ Removing and installing=>Page 80-27
  • Cable tie
  • Wiring harness holder
 
A80-0215
  • "Heater" wiring harness
  • Temperature flap control motor, right -V159
    • ◆ With temperature flap control motor potentiometer, right -G221
    • ◆ Lever colour code: Violet (brown for RHD)
    • ◆ Removing and installing=>Page 80-30
  • Central flap control motor -V70
    • ◆ With central flap control motor potentiometer -G112
    • ◆ Cam plate colour code: White (black for RHD)
    • ◆ Removing and installing=>Page 80-34
 
A80-0215
  • Defrost flap control motor -V107
    • ◆ With defrost flap control motor potentiometer -G135
    • ◆ Lever colour code: Dark green (light green for RHD)
    • ◆ Removing and installing=>Page 80-28
  • Air recirculation flap control motor
    -V113
    • ◆ On RHD vehicles, also actuates fresh-air flap (no control motor -V71 fitted)
    • ◆ With air recirculation flap control motor potentiometer -G143
    • ◆ Lever colour code: Blue (light blue with additional lug for fresh-air flap actuation on RHD)
    • ◆ Removing and installing=>Page 80-36
 
A80-0215
  • Air-flow flap control motor -V71
    • ◆ Only fitted on LHD vehicles
    • ◆ With air-flow flap control motor potentiometer -G113
    • ◆ Cam plate colour code: Light blue
    • ◆ Removing and installing=>Page 80-28
  • Lever
    • ◆ Different versions for LHD and RHD vehicles
  • Lever
    • ◆ Different versions for LHD and RHD vehicles
 
A80-0215
  • Control unit -J126 and fresh-air blower -V2
    • ◆ Removing and installing=>Page 80-23
    • ◆ Control unit -J126 is installed in fresh-air blower -V2 and cannot be replaced separately
  • Fresh-air intake duct temperature sensor -G89
    • ◆ Removing and installing=>Page 80-40

Detaching heating elements and air ducts from heater/attaching > < Dismantling and assembling heater