A4 Mk2
| Exploded view - hydraulic system |
| 1 - | Brake fluid reservoir |
| 2 - | Supply hose |
| q | For master cylinder |
| 3 - | Pipe/hose assembly |
| q | For plug-in connections on master cylinder and slave cylinder |
| q | Disconnecting from master cylinder and installing → Chapter |
| q | Disconnecting from slave cylinder → Fig. |
| q | Allocation for LHD and RHD vehicles → Electronic parts catalogue |
| 4 - | Grommet |
| 5 - | Mounting bracket |
| 6 - | Clutch pedal |
| 7 - | Master cylinder |
| q | Removing and installing → Chapter |
| q | Do not remove clip -arrow A- or seal -arrow B-. |
| q | To remove pipe/hose assembly, pull out clip -arrow A- as far as stop → Anchor. |
| 8 - | Hexagon socket head bolt |
| q | 20 Nm |
| 9 - | Retaining clip |
| q | Renew only when master cylinder has been removed |
| q | Removing → Fig. |
| q | Pressing on → Fig. |
| 10 - | Gearbox |
| 11 - | Slave cylinder |
| q | Do not operate clutch pedal after slave cylinder has been removed. |
| q | Removing and installing → Chapter |
| q | After working on hydraulic clutch mechanism, bleed clutch system → Chapter |
| q | Disconnecting pipe/hose assembly → Fig. |
| q | Do not allow brake fluid to come into contact with gearbox. |
| 12 - | Bleeder valve |
| q | Tighten to 4.5 Nm |
| q | Follow correct procedure when bleeding → Chapter |
| q | If bleeder valve has broken off, it can be removed with 3 mm Allen key |
| 13 - | Dust cap |
| 14 - | Clip |
| q | To remove pipe/hose assembly, pull out clip as far as stop → Fig.. |
| 15 - | Bracket |
| q | For pipe/hose assembly |
| q | Attached to gearbox together with slave cylinder |
| 16 - | Hexagon socket head bolt |
| q | 25 Nm |
| q | Slave cylinder to gearbox |
| q | Self-locking |
| q | Always renew |
| 17 - | Retaining clip |
| 18 - | Seal |
| 19 - | Securing bolt |
| q | For brake fluid reservoir |
|
|
|
|
