Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Dismantling and assembling gearbox >
< Removing and installing gearbox support with gearbox mounting
A4 Mk2
Power transmission
5-speed manual gearbox 012, 01W, 0A9, front-wheel drive
Gearbox mechanics,operation, construction,diff.
Checking oil level in manual gearbox
Checking oil level in manual gearbox
Checking oil level in manual gearbox
Special tools and workshop equipment required
t
Socket -3357-
Note
t
The vehicle must be horizontal when checking gear oil level. An inspection pit or a 4-post lifting platform is ideal.
t
The oil filler plug is on the left of the gearbox below the speedometer sender; it may be concealed by the heat shield for the drive shaft.
t
Use either multi-point bit -3357- or Allen key (17 mm) (according to plug version) to loosen gear oil filler plug.
–
To check oil level, unscrew oil filler plug
-arrow-
.
–
Check oil level with a suitable tool (such as a length of wire bent to shape).
t
Specification: oil level 7 mm below bottom lip of oil filler hole.
Note
The oil can be filled up to the bottom lip of the oil filler hole when servicing.
–
Top up with gear oil if necessary. Specification
→ Chapter
.
–
Screw in oil filler plug.
Tightening torque
Component
Nm
Oil filler plug
25
The plug has a coating which is matched to the material of the gearbox housing: aluminium or magnesium.
Select correct plug from
→ Electronic parts catalogue
.
Power transmission
5-speed manual gearbox 012, 01W, 0A9, front-wheel drive
Gearbox mechanics,operation, construction,diff.
Checking oil level in manual gearbox
Dismantling and assembling gearbox >
< Removing and installing gearbox support with gearbox mounting