audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Dismantling and assembling gearbox > < Removing and installing cover with centre differential
Checking oil level in manual gearbox
Checking oil level in manual gearbox
Special tools and workshop equipment required
   
t  Multi-point bit -3357-
  Note
t  The vehicle must be horizontal when checking gear oil level. An inspection pit or a 4-post lifting platform is ideal.
t  The oil filler plug is on the left side of the gearbox below the speedometer sender -G22-; it may be concealed by the heat shield for the drive shaft.
t  Use multi-point bit -3357- to loosen the oil filler plug.
  W00-0303
–  To check oil level, unscrew oil filler plug -arrow-.
t  Specification: oil level up to bottom lip of filler hole
–  Top up with gear oil if necessary. Specification → Chapter.
–  Screw in oil filler plug.
Tightening torque
  N34-0593
ComponentNm
Oil filler plug25

   

Dismantling and assembling gearbox > < Removing and installing cover with centre differential