A4 Mk2
| Removing and installing gear knob and boot |
| 1 - | Gear knob |
| q | Remove and install together with boot |
| q | Removing → |
| 2 - | Boot |
| q | Remove and install together with gear knob |
| q | Removing → |
| 3 - | Connecting piece |
| q | For securing gear knob on gear lever |
| q | Releasing the securing mechanism → Anchor |
| q | Connects boot with gear knob |
| 4 - | Cover for centre console |
| q | Removing → Anchor |
| 5 - | Damping washer |
| q | Installation position: convex side of washer on opening for gear lever must face upwards, smooth side must face downwards |
| 6 - | Noise insulation |
| 7 - | Hexagon nut |
| q | 10 Nm |
| 8 - | Noise insulation |
| q | Installation position: arrow marked on noise insulation points in direction of travel |
| 9 - | Nut |
| q | 10 Nm |
| 10 - | Gear lever |
| q | Removing and installing → Chapter |
