Detach electrical connector -1- on clutch pedal switch.
l
The clutch pedal -3- is in the normal position (i.e. not pressed down). The plunger -arrow- of the clutch pedal switch should then rest against the clutch pedal.
–
Release clutch pedal switch-2- by turning 45° anti-clockwise and take out of guide.
Installing
Installation is carried out in reverse sequence; note the following:
–
Pull out plunger -arrow- all the way before installing clutch pedal switch -F36-.
l
The clutch pedal should be in the normal position (i.e. not pressed down).
–
Guide clutch pedal switch -F36- through mounting hole, press against clutch pedal and attach by turning 45° clockwise.