audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exploded view - Selector lever cable and locking cable (vehicles from VIN 8E_6A156500 onwards) > < Removing and installing selector mechanism (vehicles from VIN 8E_6A156500 onwards)

A4 Mk2

Removing and installing selector lever lock solenoidN110 (vehicles from VIN 8E_6A156500 onwards)
Removing and installing selector lever lock solenoid -N110- (vehicles from VIN 8E_6A156500 onwards)
   
Removing
–  Remove selector mechanism cover → Chapter.
–  Unplug electrical connector at selector lever lock solenoid -N110-.
–  Press retaining hook -A- into selector mechanism -arrow- and hold in.
  Note
The shift unit must be renewed if the retaining hook -A- breaks off.
  A37-10399
–  Tilt bottom part of selector lever lock solenoid -N110- out in direction of -arrow- so that ball head -1- disengages from operating lever on selector mechanism.
–  Detach selector lever lock solenoid -N110-.
Installing
Installation is carried out in reverse sequence; note the following:
–  Turn ball head -1- into correct installation position.
–  Insert selector lever lock solenoid -N110- into selector mechanism at an angle from above.
–  Tilt bottom part of selector lever lock solenoid -N110- in opposite direction of -arrow-.
  A37-10400
–  Ball head -1- must engage fully in operating lever on selector mechanism.
–  Secure selector lever lock solenoid -N110- to retaining hook -A-.
–  Install selector mechanism cover → Chapter.
  A37-10399

Exploded view - Selector lever cable and locking cable (vehicles from VIN 8E_6A156500 onwards) > < Removing and installing selector mechanism (vehicles from VIN 8E_6A156500 onwards)