Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing tiptronic switch F189 (vehicles up to VIN 8E_6A156499) >
< Removing and installing selector lever handle (vehicles up to VIN 8E_6A156499)
A4 Mk2
Power transmission
multitronic 01J, front-wheel drive
Automatic gearbox, control, assembly, housing
Servicing selector mechanism (vehicles up to VIN 8E_6A156499)
Removing and installing selector mechanism cover (vehicles up to VIN 8E_6A156499)
Removing and installing selector mechanism cover (vehicles up to VIN 8E_6A156499)
Removing and installing selector mechanism cover (vehicles up to VIN 8E_6A156499)
Removing
–
Remove selector lever handle
→ Chapter
.
–
Open the ashtray on the centre console and remove the trim
-arrows-
.
–
Remove two retaining screws for ashtray and lift rear of ashtray.
–
Release the 4 retainers
-arrows-
and lift off the cover
-1-
including the guide.
–
Unplug electrical connector from the side of the guide.
Installing
Installation is carried out in reverse sequence; note the following:
–
Install selector lever handle
→ Chapter
.
Power transmission
multitronic 01J, front-wheel drive
Automatic gearbox, control, assembly, housing
Servicing selector mechanism (vehicles up to VIN 8E_6A156499)
Removing and installing selector mechanism cover (vehicles up to VIN 8E_6A156499)
Removing and installing tiptronic switch F189 (vehicles up to VIN 8E_6A156499) >
< Removing and installing selector lever handle (vehicles up to VIN 8E_6A156499)