audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Gearbox,mechanics,gears,shafts,internal operation > < Servicing selector shaft

A4 Mk2

Renewing oil seal for selector shaft with gearbox removed (gearbox remains assembled)
Renewing oil seal for selector shaft with gearbox removed (gearbox remains assembled)
Special tools and workshop equipment required
   
t  Tube -VW 423-
  W00-0140
t  Extractor lever -T20143/1-
t  Assembly sleeve -01E 311 120-
t  Sealing grease -G 052 128 A1-
Removing
  W00-2958
l  With selector shaft installed
–  Carefully lever out oil seal, making sure shaft is not damaged.
  A34-0624
l  With selector shaft removed
–  Carefully lever out oil seal using a screwdriver or extractor tool -T20143-.
Installing
  A34-0650
–  To avoid damaging oil seal -C-, oil seal and selector shaft must only be fitted using assembly sleeve -01E 311 120--A-.
–  Pack space between sealing lip and dust lip half-full with sealing grease -G 052 128 A1-.
–  Lightly oil outer circumference of oil seal.
  V34-2598
–  Knock in new oil seal -arrow- to a depth of 1.0 ± 0.2 mm below surface of housing; keep seal straight when installing.
  V34-2782

Gearbox,mechanics,gears,shafts,internal operation > < Servicing selector shaft