t
| Loosen the nuts and bolts in reverse sequence to the specified tightening sequence. |
t
| Nuts and bolts which secure covers and housings should be loosened and tightened in diagonal sequence and in stages if no tightening sequence is specified. |
t
| Loosen and tighten particularly sensitive parts in diagonal sequence and in stages, taking care to keep them straight. |
t
| The tightening torques stated apply to non-oiled nuts and bolts. |
t
| Always renew self-locking bolts and nuts. |
t
| Use a wire brush to clean the threads of bolts which are secured with locking fluid. Then apply locking fluid -AMV 185 101 A1- to bolt threads before installing. |
t
| Threaded holes which take self-locking bolts or bolts coated with locking fluid must be cleaned (using a tap or similar). Otherwise there is a danger of the bolts shearing off the next time they are removed. |
|
|
|