| Rules for cleanliness when working on the gearbox |
| t
| Thoroughly clean all joints and surrounding areas before dismantling. |
| t
| Clean the gearbox and gearbox components with cleaning fluid -D 009 401 04-. |
| t
| Onlly use lint-free cloths for cleaning, e.g. a “WYPALL X70 / WORKHORSE” cloth from Kimberly-Clark Professional. |
| t
| Place removed parts on a clean surface and cover them over. Use sheeting or lint-free cloths. |
| t
| Carefully cover or seal open components if repairs cannot be carried out immediately. |
| t
| Only install clean components: do not remove replacement parts from packaging until just before installation. |
|
|
|
