audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator fan > < Removing and installing radiator

A4 Mk2

Removing and installing radiator cowl
Removing and installing radiator cowl
Removing
   
–  Pull off engine cover panel -arrows-.
–  Move lock carrier to service position → Chapter.
–  Pull off engine cover panel -arrows-.
  A10-10292
–  Detach electrical connectors -1- and -2- from bracket and unplug.
–  Move wiring clear.
  A10-10282
–  Unscrew bolts -arrows- and lift out radiator cowl.
Installing
Installation is carried out in the reverse order; note the following:
–  Install lock carrier with attachments → General body repairs, exterior; Rep. Gr.50.
  A19-10153
–  Allow stop for torque reaction support to rest on rubber buffer for torque reaction support under its own weight and tighten nuts -arrows-.
–  Install front bumper cover → General body repairs, exterior; Rep. Gr.63.
–  Check headlight adjustment → Booklet803.
Tightening torques
  A10-10288
ComponentNm
Radiator cowl toM611
Lock carrierPanel bolt2
Stop for torque reaction support28
Hose clips (9 mm wide)3
Hose clips (13 mm wide)5.5

   

Removing and installing radiator fan > < Removing and installing radiator