A4 Mk2
|
| 1 - | Crankcase breather hose |
| 2 - | ACF line |
| 3 - | Vacuum unit for turbocharger |
| q | Removing and installing → Chapter |
| q | Checking → Chapter |
| q | Adjusting → Chapter |
| 4 - | Seal |
| q | Renew |
| 5 - | Nipple |
| 6 - | Hose |
| 7 - | 8 Nm |
| 8 - | Hose |
| 9 - | 3 Nm |
| 10 - | Charge pressure control solenoid valve -N75- |
| 11 - | Hose |
| 12 - | 7 Nm |
| 13 - | Bracket |
| 14 - | 7 Nm |
| 15 - | Turbocharger air recirculation valve -N249- |
| q | Note installation position → Fig. |
| 16 - | Seal |
| q | Renew |
| 17 - | Turbocharger |
| q | Can only be renewed together with exhaust manifold and vacuum unit as one unit |
| q | Removing and installing → Chapter |
| 18 - | Gasket |
| q | Renew |
| 19 - | 9 Nm |
|
|
| 1 - | Turbocharger |
| q | Can only be renewed together with exhaust manifold and vacuum unit as one unit |
| q | Removing and installing → Chapter |
| 2 - | Seal |
| q | Renew |
| 3 - | 35 Nm |
| 4 - | 9 Nm |
| 5 - | Coolant supply pipe |
| 6 - | 35 Nm |
| 7 - | 23 Nm |
| 8 - | Seal |
| q | Renew |
| 9 - | 9 Nm |
| 10 - | Gasket |
| q | Renew |
| 11 - | Oil return pipe |
| 12 - | 9 Nm |
| 13 - | Gasket |
| q | Renew |
|
| 1 - | Gasket |
| q | Renew |
| 2 - | 21 Nm |
| q | Renew |
| q | Coat studs of exhaust manifold with high-temperature paste |
| q | High-temperature paste → Parts catalogue |
| 3 - | 35 Nm |
| 4 - | Seal |
| q | Renew |
| 5 - | Coolant return hose/pipe |
| 6 - | 9 Nm |
| 7 - | Turbocharger |
| q | Can only be renewed together with exhaust manifold and vacuum unit as one unit |
| q | Removing and installing → Chapter |
| 8 - | 30 Nm |
| 9 - | Seal |
| q | Renew |
| 10 - | Oil supply pipe |
| 11 - | 9 Nm |
| 12 - | 30 Nm |
| 13 - | Seal |
| q | Renew |
| 14 - | 23 Nm |
| 15 - | Bracket |
| 16 - | Support |
| 17 - | 30 Nm |
| q | Lubricate bolts with high-temperature paste |
| q | High-temperature paste → Parts catalogue |
| 18 - | 30 Nm |
| q | Lubricate bolts with high-temperature paste |
| q | High-temperature paste → Parts catalogue |
| 19 - | 30 Nm |
| q | Do not open when removing turbocharger |
| q | Renew |
| q | Coat studs of exhaust manifold with high-temperature paste |
| q | High-temperature paste → Parts catalogue |
| 20 - | Fastening strip |
| Part IV |
| Part I → Anchor |
| Part II → Anchor |
| Part III → Anchor |
| 1 - | Turbocharger |
| q | Can only be renewed together with exhaust manifold and vacuum unit as one unit |
| q | Removing and installing → Chapter |
| 2 - | Vacuum unit for turbocharger |
| q | Checking → Chapter |
| q | Removing and installing → Chapter |
| q | Adjusting → Chapter |
| 3 - | 10 Nm |
| 4 - | Locking plate |
| 5 - | 9 Nm |
| q | Secure with sealing paint |
| q | Sealing paint → Parts catalogue |
| 6 - | Knurled nut |
