A4 Mk2
| Thermostat housing - exploded view of components |
| 1 - | O-ring |
| q | Renew |
| 2 - | Thermostat housing |
| q | Removing and installing → Chapter |
| 3 - | O-ring |
| q | Renew |
| 4 - | Coolant pipe (bottom) |
| q | Removing and installing → Chapter |
| 5 - | 10 Nm |
| 6 - | 15 Nm |
| 7 - | O-ring |
| q | Renew |
| 8 - | Heating element connection |
| q | 14 … 16 Ω at 25 °C |
| q | Cannot be renewed separately |
| 9 - | Electrical connector |
| 10 - | Thermostat for map-controlled engine cooling system -F265- |
| q | With hose connection |
| q | Removing and installing → Chapter |
| q | Checking → Chapter |
| q | Starts to open at approx. 105 °C |
| q | Opening travel at least 7 mm |
