A4 Mk2
Diagram of coolant hose connections |
1 - | Radiator |
q | Removing and installing → Chapter |
q | If renewed, refill system with fresh coolant |
2 - | Coolant pipe (top) |
q | Removing and installing → Chapter |
3 - | Thermostat housing with map-controlled engine cooling thermostat -F265- |
q | Removing and installing → Chapter |
q | Checking thermostat → Chapter |
4 - | Coolant pump |
q | Removing and installing → Chapter |
5 - | Turbocharger |
6 - | Cylinder head/cylinder block |
q | If renewed, refill system with fresh coolant |
7 - | Bleeder hole |
8 - | Heat exchanger |
q | If renewed, refill system with fresh coolant |
9 - | Coolant pipe (bottom) |
q | Removing and installing → Chapter |
10 - | Oil cooler |
Removing and installing → Chapter „Removing and installing oil filter bracket“ |
q | If renewed, refill system with fresh coolant |
11 - | Expansion tank |
q | With filler cap |
q | Checking pressure relief valve in filler cap → Anchor |
12 - | Intake manifold |