audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator fan > < Removing and installing radiator

A4 Mk2

Removing and installing radiator cowl
Removing and installing radiator cowl
   
Removing
–  Move lock carrier to service position → Chapter.
–  Pull off engine cover panel -arrows-.
  A10-10294
–  Detach electrical connectors -1- and -2- from bracket and unplug.
–  Move wiring clear.
  A10-10282
–  Unplug electrical connector -1- for bonnet lock and move wiring clear.
–  Unscrew bolts -arrows- and lift out radiator cowl.
Installing
Installation is carried out in the reverse order; note the following:
–  Install lock carrier with attachments → Rep. Gr.50.
  A19-10153
–  Allow stop for torque reaction support to rest on rubber buffer for torque reaction support under its own weight and tighten nuts -arrows-.
–  Install bumper cover (front) → Rep. Gr.63.
Tightening torques
  A10-10288
ComponentNm
Radiator cowl toM611
Lock carrierPanel bolt2
Stop for torque reaction support to lock carrier28
Hose clips (9 mm wide)3
Hose clips (13 mm wide)5.5

   

Removing and installing radiator fan > < Removing and installing radiator