audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Checking charge air system for leaks > < Removing and installing charge air cooler (right-side)

A4 Mk2

Removing and installing charge pressure senderG31 / intake air temperature senderG42
Removing and installing charge pressure sender -G31- / intake air temperature sender -G42-
   
Removing
–  Unplug electrical connector -2- at charge pressure sender -G31-/intake air temperature sender -G42-.
–  Remove bolts and pull charge pressure sender -G31- / intake air temperature sender -G42- out of charge air cooler.
  Note
Disregard -item 1-.
Installing
Installation is carried out in the reverse order; note the following:
  Note
Renew O-ring.
Tightening torque
  A21-0156
ComponentNm
Charge pressure sender -G31-/intake air temperature sender -G42- to charge air cooler5

   

Checking charge air system for leaks > < Removing and installing charge air cooler (right-side)