A4 Mk2
Diagram of coolant hose connections |
1 - | Radiator |
q | Removing and installing → Chapter |
q | If renewed, refill system with fresh coolant |
2 - | Bleeder screw, 15 Nm |
3 - | Thermostat |
q | Removing and installing → Chapter |
q | Checking → Chapter |
4 - | Cylinder head/cylinder block |
q | If renewed, refill system with fresh coolant |
5 - | Throttle valve module -J338- |
6 - | Bleeder hole |
q | On coolant hose to heat exchanger |
7 - | Heat exchanger |
q | If renewed, refill system with fresh coolant |
8 - | Expansion tank |
q | With filler cap |
q | Checking pressure relief valve in filler cap → Anchor |
9 - | Oil cooler |
q | If renewed, refill system with fresh coolant |
10 - | Coolant pump |
q | Removing and installing → Chapter |