Audi Workshop Service and Repair Manuals > A4 Mk2 > Power unit | 8-cylinder direct petrol injection engine (4.2 ltr. 4-valve RS 4), mechanics | Engine cooling | Cooling system | Removing and installing radiator fan V7 (left side)

Removing and installing radiator fanV7 (left side)

Removing and installing radiator fan -V7- (left side)

Removing

Note

All cable ties which are released or cut open when removing must be fitted in the same position when installing.

–	Move lock carrier to service position → Rep. Gr.50.

–	Unplug electrical connector -3-.

Note

Ignore other items.

–	Move wiring harness going to radiator fan clear.

–	Unplug electrical connector for bonnet lock.

–	Unscrew bolts -arrows- and remove radiator fan.

Installing

Installation is carried out in the reverse order; note the following:

Note

Fit all cable ties in the original positions when installing.

–	Install lock carrier with attachments → Rep. Gr.50.

–	Install bumper cover (front) → Rep. Gr.63.

Tightening torque

Component	Nm
Radiator fan to lock carrier	9

Audi Workshop Service and Repair Manuals