A4 Mk2
| Drive chain for auxiliary drives - exploded view |
| 1 - | 5 Nm + turn 90° further |
| q | Renew |
| 2 - | Chain tensioner |
| q | With guide rail |
| 3 - | Seal |
| q | Renew |
| 4 - | Compression spring |
| 5 - | 42 Nm |
| 6 - | Bearing mounting for idler sprocket |
| 7 - | Idler sprocket for chain of auxiliary drives |
| 8 - | Thrust washer |
| q | Depending on version |
| 9 - | Mounting bracket for idler sprocket |
| 10 - | 5 Nm + turn 90° further |
| q | Renew |
| 11 - | Drive chain for auxiliary drives |
| q | Before removing, mark running direction with paint. If a used drive chain rotates in the opposite direction when it is refitted, this can cause breakage. |
| q | Removing and installing → Chapter |
| 12 - | Crankshaft |
| 13 - | Drive chain sprocket for auxiliary drives |
| 14 - | 64 Nm |
