audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing engine oil cooler on engine > < Oil filter housing - exploded view

A4 Mk2

Removing and installing oil filter housing
Removing and installing oil filter housing
   
Removing
–  Remove intake manifold → Rep. Gr.24.
  Note
Place a cloth around the oil filter housing to catch any escaping oil.
–  Unscrew bolts -arrows- and remove oil filter housing.
Installing
Installation is carried out in the reverse order; note the following:
  Note
Renew seals and O-rings.
–  Install intake manifold → Rep. Gr.24.
–  Fill up with engine oil and check oil level → Booklet803 or → Booklet805.
Tightening torques
  A17-10098
ComponentNm
Oil filter housing to cylinder blockM89
 M1022
Cap on oil filter housing25

   

Removing and installing engine oil cooler on engine > < Oil filter housing - exploded view