Audi Workshop Service and Repair Manuals

Securing engine to engine and gearbox stand

Special tools and workshop equipment required

t	Shackle -10-222 A/12-

t	Lifting tackle -3033-

t	Engine and gearbox support -VAS 6095- with bracket for V8 engine, Audi S4, allroad quattro -VAS 6095/1-6- or bracket for V8 engine, Audi S4, allroad quattro -VAS 6095/1-6A-

t	Workshop hoist -VAS 6100-

t	Lift arm extension (workshop hoist) -VAS 6101-

t  Hooks -10-222 A/2-

Procedure –  Unbolt bracket for wiring harness at engine console (right-side) -arrows-.

–  Unplug electrical connector -1- at engine mounting (right-side). –  Remove bolts -arrows- and detach engine support (right-side).   Note Shown in illustration without console for engine mounting. –  Repeat procedure on other side of vehicle.

–  Detach vacuum hose -1-. –  Detach air intake hose -2- from throttle valve module.

–  Attach the shackle -10-222 A/12- to the engine lifting eye (rear right). –  Attach hook -10-222 A/2- to shackle -10-222 A/12-.

–  Attach the lifting tackle -3033- to hook -10-222 A/2- and workshop hoist -VAS 6100- with lift arm extension (workshop hoist) -VAS 6101- as shown in the illustration. –  Lift engine off the support elements on scissor-type assembly platform -VAS 6131 A-.

–  Secure engine to engine and gearbox support -VAS 6095- with bracket for V8 engine, Audi S4, allroad quattro -VAS 6095/1-6- or bracket for V8 engine, Audi S4, allroad quattro -VAS 6095/1-6A-, as shown in the illustration. Tightening torque: 42 Nm.