A4 Mk2
Diagram of coolant hose connections |
1 - | Auxiliary radiator (right-side) |
q | Removing and installing → Chapter |
q | If renewed, refill system with fresh coolant |
2 - | Not fitted |
3 - | Thermostat for auxiliary radiator |
4 - | Oil cooler |
q | Removing and installing → Chapter |
5 - | Cylinder head/cylinder block |
q | If renewed, refill system with fresh coolant |
6 - | Heat exchanger |
q | If renewed, refill system with fresh coolant |
7 - | Bleed hole |
q | On coolant hose for heat exchanger |
8 - | Filler cap |
q | Checking pressure relief valve in filler cap → Anchor |
9 - | Expansion tank |
10 - | Not fitted |
11 - | Auxiliary radiator (left-side) |
q | Removing and installing → Chapter |
q | If renewed, refill system with fresh coolant |
12 - | Non-return valve |
q | Permits passage in direction of arrow; closed in opposite direction |
13 - | Radiator |
q | Removing and installing → Chapter |
q | If renewed, refill system with fresh coolant |
14 - | Thermostat |
q | Removing and installing → Chapter |
q | Checking → Chapter |
15 - | Coolant pump |
q | Removing and installing → Chapter |
16 - | Alternator |