audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing crankshaft oil seal (timing chain end) > < Drive plate - exploded view of components

A4 Mk2

Removing and installing drive plate
Removing and installing drive plate
Special tools and workshop equipment required
   
t  Counterhold tool -10-201-
  W00-0254
Removing
l  Gearbox removed.
–  Mark installation position of drive plate and washer on crankshaft.
–  Attach counterhold tool -10-201- in order to loosen bolts.
–  Unbolt drive plate.
Installing
Installation is carried out in the reverse order; note the following:
–  Install drive plate with washer.
–  Use new securing bolts.
–  Reverse position of counterhold tool -10-201- in order to tighten bolts.
Tightening torque
  A13-0574
ComponentNm
Drive plate to crankshaft30 + 90° → Note → Note

1)  90° equals a 1/4 turn.
2)  Renew bolts.
   

Renewing crankshaft oil seal (timing chain end) > < Drive plate - exploded view of components