audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
4-cylinder direct petrol injection engine (2.0 ltr. 4-valve turbo), mechanics > < Ignition system - exploded view

A4 Mk2

Removing and installing ignition coils with output stages
Removing and installing ignition coils with output stages
Special tools and workshop equipment required
   
t  Puller -T40039-
Removing
  W00-1303
–  Unscrew two bolts -1- on connector rail.
  A28-10026
–  Pull all ignition coils approx. 30 mm out of spark plug holes using puller -T40039-.
  N28-10011
–  Release connectors and unplug all connectors from the ignition coils at the same time.
Installing
–  Fit all ignition coils loosely into spark plug holes.
  A28-10026
–  Align the ignition coils with the connectors and attach all connectors onto ignition coils simultaneously.
–  Press ignition coils onto spark plugs by hand with uniform pressure (do not use tool).
  N28-10012

4-cylinder direct petrol injection engine (2.0 ltr. 4-valve turbo), mechanics > < Ignition system - exploded view