audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Fuel delivery unit, fuel gauge sender - vehicles with front-wheel drive and 2.7 ltr. 6-cylinder engine > < Checking fuel gauge sender G

A4 Mk2

Removing and installing fuel gauge senderG
Removing and installing fuel gauge sender -G-
Removing
Observe safety precautions → Chapter.
Observe rules for cleanliness → Chapter.
   
–  Remove fuel delivery unit → Chapter.
  Caution
First release retainer tabs on connector contact before detaching electrical connectors on fuel gauge sender -G-.
–  Release retainer tabs on electrical connectors -1- and -2- and then detach electrical connectors.
–  Lift retaining tabs -3- and -4- with a screwdriver and pull fuel gauge sender -G- off downwards -arrow-.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert fuel gauge sender -G- into guides on fuel delivery unit and press upwards until sender clicks into place.
–  Plug in electrical connectors and check that they have engaged properly.
–  Install fuel delivery unit → Anchor.
  A20-0706

Fuel delivery unit, fuel gauge sender - vehicles with front-wheel drive and 2.7 ltr. 6-cylinder engine > < Checking fuel gauge sender G