–
| Carefully pull flange -1- with fuel gauge sender 2 -G169- and suction-jet pump -2- just slightly out of opening in fuel tank. |
Note When removing, make sure you do not bend float arm of fuel gauge sender 2 -G169-. |
–
| Unclip suction-jet pump from flange with fuel gauge sender 2 -G169-. |
–
| Remove flange with fuel gauge sender 2 -G169-. |
Installation is carried out in the reverse order; note the following: |
Note t
| When installing, make sure you do not bend float arm of fuel gauge sender 2 -G169-. |
–
| Clip suction-jet pump onto flange, so that you hear it click into place. |
–
| Carefully insert fuel gauge sender 2 -G169- into opening in fuel tank. |
|
|
|