Servicing Motronic injection system
Rules for cleanliness
When working on fuel supply/injection system, pay careful attention to the following rules:
-
◆ Carefully clean all joints and adjacent areas before disconnecting.
-
◆ Place parts removed on a clean surface and cover them over. Do not use fluffy cloths.
-
◆ Carefully cover or seal opened components if repairs are not to be performed immediately.
-
◆ Only install clean components:
Do not remove replacement parts from wrapping until immediately prior to installation. Do not use parts that have been stored loose (e.g. in tool boxes).
-
◆ When system is open:
Do not work with compressed air if at all possible. Do not move vehicle unless absolutely necessary.
-
◆ Unplugged connectors:
Protect against dirt and damp. Only connect when dry.
|