audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Fault-finding for DRC II > < Fitting locations
Central valve and pipe connections for suspension struts
   
Central valve and pipe connections for suspension struts
1 - Central valve for front right and rear left
q   Central valve is located on left side of vehicle (in direction of travel)
2 - Hexagon nut
q   23 Nm
3 - Shut-off valve for pipe connection (rear left)
4 - Shut-off valve for pipe connection (front right)
5 - Hexagon nut
q   23 Nm
6 - Shut-off valve for pipe connection (front left)
7 - Shut-off valve for pipe connection (rear right)
8 - Central valve for front left and rear right
q   Central valve is located on right side of vehicle (in direction of travel)
9 - DRC pipe to shock absorber (rear right)
q   19 Nm
10 - DRC pipe to suspension strut (front left)
q   19 Nm
11 - DRC pipe to suspension strut (front right)
q   19 Nm
12 - DRC pipe to shock absorber (rear left)
q   19 Nm
13 - Cut-off screw
q   To close, turn fully clockwise
q   To open, turn fully anti-clockwise
14 - Lock nut
q   12 Nm

   
Suspension strut (front)
  Note
When tightening connection -2- make sure that locating lug engages properly in bracket.
-1- Tightening torque: 19 Nm
-2- Tightening torque: 19 Nm
  A43-10068
Shock absorber (rear)
  Note
t  When tightening connection -2- make sure that locating lug engages properly in bracket.
t  When tightening connection -2-, counter-hold at connecting piece -3-.
-1- Tightening torque: 19 Nm
-2- Tightening torque: 19 Nm
  A43-10067

Fault-finding for DRC II > < Fitting locations