A4 Mk2
| servotronic steering box: exploded view |
| 1 - | Power steering box with track rods |
| q | Exploded view for LHD/RHD vehicles → Chapter |
| 2 - | Electrical connector for servotronic solenoid valve -N119- |
| q | Fitting location: In wheel housing (front left) |
| 3 - | Relay carrier, 9-position |
| q | Located underneath trim in driver's footwell → Current flow diagrams, Electrical fault finding and Fitting locations |
| q | servotronic control unit -J236-, position 2 |
| q | Checking voltage supply → Chapter |
| q | Checking speed signal → Chapter |
| 4 - | servotronic solenoid valve -N119- with integral moulded connecting cable |
| q | Steering box must be removed in order to renew servotronic solenoid valve |
| q | Checking → Chapter |
| Do not slacken Torx bolts |
| 5 - | Adapter cable |
| 6 - | Hexagon socket head bolt, 3 Nm |
| q | 2.5 mm |
| Do not slacken Torx bolts |
| 7 - | servotronic solenoid valve -N119- with plug connector |
| q | Steering box must be removed in order to renew servotronic solenoid valve |
| q | Checking → Chapter |
| Do not slacken Torx bolts |
| 8 - | Seal |
| q | Always renew |
| 9 - | Seal |
| q | Always renew |
| 10 - | Strainer |
| q | Always renew |