audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing function selection switch 2 E272 > < Overview of fitting locations (Avant)

A4 Mk2

Removing and installing navigation system with CD drive control unitJ401
Removing and installing navigation system with CD drive control unit -J401-
Special tools and workshop equipment required
   
t  Radio release tool -T10057-
–  Switch off all electrical equipment.
–  Remove ignition key.
Removing
–  Open left-side luggage compartment storage area.
  W00-1042
–  Insert two radio release tools -T10057- into slots on navigation system with CD drive control unit -J401--2- until they engage. Pointed ends of grips must face outwards.
–  Pull navigation system with CD drive control unit -J401--2- out of mounting frame -1-.
–  Unplug electrical connectors at navigation system with CD drive control unit -J401--2-.
–  Pull out radio release tools -T10057- by pressing tabs on navigation system with CD drive control unit -J401-.
Installing
–  Plug in all connectors.
–  Insert the navigation system with CD drive control unit -J401- into mounting frame until it engages.
–  If necessary, perform adaptions on navigation system with CD drive control unit -J401- → Vehicle diagnosis, testing and information system VAS 5051.
  A91-0611

Removing and installing function selection switch 2 E272 > < Overview of fitting locations (Avant)