In the event of a system fault, the fault is stored in the fault memory and/or a fault message appears on the display of navigation system with CD drive control unit -J401-.
At present, the following fault messages can be shown on the display of navigation system with CD drive control unit -J401-.
Indicated on display:
DVD read error Please check DVD
This fault message occurs in the following situations:
t
The DVD cannot be read.
t
DVD is defective.
t
The DVD drive is defective.
–
Check whether the DVD drive can read a replacement DVD.
If the same fault message occurs:
–
Perform adaption of channel 41.
To do so, use the vehicle diagnostic, testing and information system -VAS 5051-.
Indicated on display:
CD/DVD drive defect. Unable to read data. Consult your dealer.
This fault message occurs in the following situations:
t
The DVD drive cannot read the DVD data.
t
DVD is defective.
t
The DVD drive is defective.
–
Check whether the DVD drive can read a replacement DVD.
If the same fault message occurs:
–
Perform adaption of channel 41.
To do so, use the vehicle diagnostic, testing and information system -VAS 5051-.