audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Navigation system RNS-E - overview > < General notes

A4 Mk2

On-screen fault messages
On-screen fault messages
In the event of a system fault, the fault is stored in the fault memory and/or a fault message appears on the display of navigation system with CD drive control unit -J401-.
At present, the following fault messages can be shown on the display of navigation system with CD drive control unit -J401-.
Indicated on display:
   
CD/DVD is unreadable
Please check the CD/DVD

This fault message occurs in the following situations:
t  The DVD cannot be read.
t  DVD is defective.
t  The DVD drive is defective.
–  Check whether the DVD drive can read a replacement DVD.
If the same fault message occurs:
–  Perform adaption of channel 41.
To do so, use the vehicle diagnostic, testing and information system -VAS 5051-.
Indicated on display:
   
CD/DVD drive defect.
Unable to read data.
Consult your dealer.

This fault message occurs in the following situations:
t  The DVD drive cannot read the DVD data.
t  DVD is defective.
t  The DVD drive is defective.
–  Check whether the DVD drive can read a replacement DVD.
If the same fault message occurs:
–  Perform adaption of channel 41.
To do so, use the vehicle diagnostic, testing and information system -VAS 5051-.
   

Navigation system RNS-E - overview > < General notes