audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing rear ashtray light > < Removing and installing glove box light
Removing and installing ashtray light (front)
Removing and installing ashtray light (front)
   
Removing
–  Pull radio approx. 10 mm out of mounting slot → Rep. Gr.91.
–  Remove operating and display unit for air conditioner -E87- → Rep. Gr.87.
–  Open front ashtray.
–  Remove front ashtray insert -2-.
–  Pull off cover -1- for gear lever or selector lever on both sides -arrows-.
  A96-10090
–  Unscrew bolts -arrows-.
–  Lift out front ashtray upwards.
–  Unplug electrical connector.
  A96-10091
–  Release retaining clips -2- and swivel light -1- for front ashtray out of retainer -arrow-.
Installing
Installation is carried out in the reverse order; note the following:
–  Install operating and display unit for air conditioner -E87- → Rep. Gr.87.
Tightening torque
  A96-10092
ComponentNm
Ashtray (front) to centre console5

   

Removing and installing rear ashtray light > < Removing and installing glove box light