–
| Unplug electrical connector -3-. |
–
| Release retaining clip -1- and take gas discharge lamp -2- out of housing. |
Installation is carried out in the reverse order; note the following: |
–
| Insert new gas discharge lamp in housing; do not touch glass bulb with bare hands. |
Note Heed installation position: lug at top of bulb holder must engage in recess of gas discharge lamp. |
–
| Secure gas discharge lamp with retaining clip. |
–
| Secure housing cover with bolts and retaining clip. |
–
| Connect the battery. Additional steps required → Anchor. |
|
|
|