audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing fog light bulb > < Fog lights - vehicles up to 10.2004

A4 Mk2

Removing and installing fog lights
Removing and installing fog lights
   
Removing
–  Switch off ignition and take out ignition key.
–  Turn light switch to position “0”.
Audi A4:
–  Release retaining hooks -1 ... 4- using a screwdriver -arrow- and pull off air intake grille in bottom section of bumper.
  A94-0342
Audi S4:
–  Turn bolt -1- 90° (1/4 turn).
–  Detach air intake grille from fog light housing in direction of -arrow A-.
–  Then push air intake grille in direction of -arrow B- and simultaneously disengage retaining clip -2-.
–  Remove air intake grille.
  A94-10068
All models:
–  Unscrew bolts -arrows-.
–  Disengage headlamp insert and remove.
–  Unplug electrical connector.
Installing
Installation is carried out in the reverse order; note the following:
–  Engage fog light on inside at bumper.
–  Adjust fog lights → Booklet803.
Tightening torque
  A94-0302
ComponentNm
Fog light housing to bumper5

   

Renewing fog light bulb > < Fog lights - vehicles up to 10.2004