audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing main and dip beam switch-over solenoid > < Renewing daylight driving light bulb

A4 Mk2

Renewing bulb for side lights
Renewing bulb for side lights
   
Removing
–  Switch off ignition and take out ignition key.
–  Turn light switch to position “0”.
Headlight (right-side):
–  Unscrew bolts -arrows-.
–  Remove air ducts -1- and -2-.
  A10-0746
Both sides (continued):
–  Release retaining tab -arrow- and detach housing cover for side lights from headlight housing.
  A94-10086
–  Release the two retainer tabs and pull bulb holder -1- out of housing -arrow-.
–  Pull bulb for side lights out of bulb holder.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert new bulb in bulb holder, taking care not to touch glass bulb with bare hands.
–  Close housing cover.
  A94-10084

Removing and installing main and dip beam switch-over solenoid > < Renewing daylight driving light bulb