audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Installing repair kit for headlight housing > < Removing and installing control unit for gas discharge lamp - vehicles up to approx. 09.2001

A4 Mk2

Removing and installing control unit for gas discharge lamp - vehicles from approx. 09.2001
Removing and installing control unit for gas discharge lamp - vehicles from approx. 09.2001
Removing
  WARNING
High voltage! Danger to life!
Safety precautions when handling gas discharge lamps → Electrical system; General information; Rep. Gr.94.
   
–  Remove headlight → Chapter.
–  Release retaining clip -arrow- and detach housing cover for dipped beam from headlight housing.
  A94-10049
–  Release retaining clip -2- and take gas discharge lamp -3- out of housing.
–  Unplug electrical connector -1-.
  A94-10067
–  Unscrew bolts -arrows-.
–  Detach control unit from headlight housing.
–  Unplug the electrical connectors.
–  Detach adapter lead for gas discharge lamp.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert gas discharge lamp in housing; do not touch glass bulb with bare hands.
  Note
Heed installation position: lug at top of bulb holder must engage in recess of gas discharge lamp.
–  Secure gas discharge lamp with retaining clip.
–  Secure housing cover with retaining clip.
–  Install headlight → Anchor.
  A94-0313

Installing repair kit for headlight housing > < Removing and installing control unit for gas discharge lamp - vehicles up to approx. 09.2001