audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing bulb for turn signal > < Renewing bulb for main beam headlights

A4 Mk2

Renewing bulb for side lights
Renewing bulb for side lights
   
Removing
–  Switch off ignition and take out ignition key.
–  Turn light switch to position “0”.
Headlight (left-side):
–  Detach cover (left-side) -1- in engine compartment.
  A10-1031
–  Remove electrical connectors -1- and -2- from retainer.
–  Unclip retainer for connectors and pull off upwards -arrow-.
Headlight (right-side) - vehicles with 1.6 ltr. and 2.0 ltr. MPI engine:
–  Remove air cleaner housing → Chapter.
Headlight (right-side) - vehicles with 1.8 ltr. turbo engine:
–  Remove air cleaner housing → Chapter.
Headlight (right-side) - vehicles with 2.0 ltr. FSI engine:
–  Remove air cleaner housing → Chapter.
Right headlight - vehicles with 6-cyl. petrol engine:
–  Remove air cleaner housing → Chapter.
Right headlight - vehicles with 8-cyl. petrol engine:
–  Remove air cleaner housing → Chapter.
Right headlight - vehicles with 4-cyl. TDI engine:
–  Remove air cleaner housing → Chapter.
Right headlight - vehicles with 6-cyl. TDI engine:
–  Remove air cleaner housing → Chapter.
  A94-0292
Both sides (continued):
–  Release retaining clip -arrow- and detach housing cover for main beam from headlight housing.
  A94-10066
–  Release the two retainer tabs and pull bulb holder -arrow- out of housing.
–  Pull bulb for side lights out of bulb holder.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert new bulb in bulb holder, taking care not to touch glass bulb with bare hands.
–  Secure housing cover with retaining clip.
  A94-0299

Renewing bulb for turn signal > < Renewing bulb for main beam headlights