audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing bulb for turn signal > < Renewing bulb for main beam headlights

A4 Mk2

Renewing bulb for side lights
Renewing bulb for side lights
   
Removing
–  Switch off ignition and take out ignition key.
–  Turn light switch to position “0”.
–  Unscrew bolts -arrows-.
–  Detach activated charcoal filter solenoid valve 1 -N80--item 1- at air duct.
–  Remove air duct -2-.
  A10-0900
–  Release retaining clip -arrow- and detach housing cover for main beam/side lights from headlight housing.
  A94-10123
–  Remove bulb -1- from spring clips -arrows-.
  Note
Disregard -item 2-.
  A94-10125
–  Pull holder -1- for side light bulb out of housing -arrow-.
–  Pull bulb for side lights out of bulb holder.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert new bulb in bulb holder, taking care not to touch glass bulb with bare hands.
–  Press bulb holder for side lights into reflector until you feel it engage.
–  Position bulb for main beam headlight at lower spring clip.
–  Push bulb for main beam headlight into housing (overcome resistance of upper spring clips).
–  Close housing cover.
–  Secure housing cover with retaining clip.
  A94-10124

Renewing bulb for turn signal > < Renewing bulb for main beam headlights