audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing bulb for side lights > < Renewing bulb for dipped beam headlights

A4 Mk2

Renewing bulb for main beam headlights
Renewing bulb for main beam headlights
   
Removing
–  Switch off ignition and take out ignition key.
–  Turn light switch to position “0”.
Headlight (left-side):
–  Detach cover (left-side) -1- in engine compartment.
  A10-1031
–  Remove electrical connectors -1- and -2- from retainer.
–  Unclip retainer for connectors and pull off upwards -arrow-.
Headlight (right-side) - vehicles with 1.6 ltr. and 2.0 ltr. MPI engine:
–  Remove air cleaner housing → Chapter.
Headlight (right-side) - vehicles with 1.8 ltr. turbo engine:
–  Remove air cleaner housing → Chapter.
Headlight (right-side) - vehicles with 2.0 ltr. FSI engine:
–  Remove air cleaner housing → Chapter.
Right headlight - vehicles with 6-cyl. petrol engine:
–  Remove air cleaner housing → Chapter.
Right headlight - vehicles with 4-cyl. TDI engine:
–  Remove air cleaner housing → Chapter.
Right headlight - vehicles with 6-cyl. TDI engine:
–  Remove air cleaner housing → Chapter.
  A94-0292
Both sides (continued):
–  Release retaining clip -arrow- and detach housing cover for main beam from headlight housing.
  A94-10066
–  Detach electrical connector -3- at main beam bulb.
–  Release retaining clip -2- and take bulb -1- out of housing.
Installing
Installation is carried out in the reverse order; note the following:
–  Fit new bulb in housing; do not touch the glass part of the bulb with bare hands.
–  Secure bulb with retaining clip.
–  Secure housing cover with retaining clip.
  A94-0298

Renewing bulb for side lights > < Renewing bulb for dipped beam headlights