Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing senders for parking aid (rear) - vehicles up to 05.2004 >
< Removing and installing senders for parking aid (front) - vehicles up to 10.2004
A4 Mk2
Vehicle electrics
Electrical system
Lights, lamps, switches outside
Parking aid
Removing and installing senders for parking aid (front) - vehicles from 11.2004
Removing and installing senders for parking aid (front) - vehicles from 11.2004
Removing and installing senders for parking aid (front) - vehicles from 11.2004
Removing
t
Fitting location: in bumper cover
-arrows-
.
Outer sender without charge air cooler/additional radiator:
–
On vehicles with auxiliary heater, unscrew bolts
-arrows-
for exhaust pipe of auxiliary/supplementary heater at noise insulation.
–
Unfasten bolts/quick release fasteners
-1-
and
-2-
and detach noise insulation (front).
Outer senders - vehicles with charge air cooler/auxiliary radiator:
–
Remove front bumper cover
→ Rep. Gr.63
.
Inner senders:
–
Remove front bumper cover
→ Rep. Gr.63
.
–
Remove radiator grille
→ Rep. Gr.63
.
All models:
–
Unplug electrical connector
-1-
at sender.
–
Press both retaining tabs aside
-arrows-
and press out sender
-2-
inwards.
Installing
Installation is carried out in the reverse order; note the following:
Outer senders - vehicles with charge air cooler/auxiliary radiator:
–
Install front bumper cover
→ Rep. Gr.63
.
Inner senders:
–
Install front bumper cover
→ Rep. Gr.63
.
–
Install radiator grille
→ Rep. Gr.63
.
Vehicle electrics
Electrical system
Lights, lamps, switches outside
Parking aid
Removing and installing senders for parking aid (front) - vehicles from 11.2004
Removing and installing senders for parking aid (rear) - vehicles up to 05.2004 >
< Removing and installing senders for parking aid (front) - vehicles up to 10.2004