Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing 9-position relay carrier >
< Removing and installing fuse carrier
A4 Mk2
Vehicle electrics
Electrical system
Wiring / Relay carriers, fuse carriers
Removing and installing onboard supply control unit J519
Removing and installing onboard supply control unitJ519
Removing and installing onboard supply control unit -J519-
Removing
–
To renew control unit, select the “Replacement” function for the appropriate control unit in “Guided Functions” mode
→ Vehicle diagnosis, testing and information system VAS 5051
.
–
Switch off ignition and take out ignition key.
–
Remove driver's storage compartment
→ Rep. Gr.68
.
–
Unscrew nuts
-arrows-
and detach onboard supply control unit -J519-
-item 1-
.
–
Unclip fuse carriers
-1 ... 3-
.
–
Release retaining clip at connector
-item 4-
and unplug connector.
–
Unplug electrical connectors
-5-
and
-6-
.
Installing
Installation is carried out in the reverse order; note the following:
–
Install driver's storage compartment
→ Rep. Gr.68
.
Tightening torque
Component
Nm
Onboard supply control unit -J519- to central tube for dash panel
2.4
Vehicle electrics
Electrical system
Wiring / Relay carriers, fuse carriers
Removing and installing onboard supply control unit J519
Removing and installing 9-position relay carrier >
< Removing and installing fuse carrier