A4 Mk2
|
|
| 1 - | PAX tyre |
| 2 - | Support ring |
| 3 - | Wheel for PAX tyre |
| q | Observe the fitting instructions → Chapter |
| 4 - | Wheel electronics |
| q | All batteries must be renewed together |
| q | Remaining service life, temperature and inflation pressure can be read out via diagnosis function with vehicle diagnostic, testing and information system -VAS 5051- |
| 5 - | Metal valve body |
| q | Use only correct valves as specified in → Electronic parts catalogue |
| q | Supplied as complete unit |
| 6 - | Wheel bolt |
Note| t | Make sure that the correct type of wheel bolts are fitted; refer to → Electronic parts catalogue. |
| t | Always use the same type of wheel bolts on all four rims of a vehicle. |
| q | Observe the fitting instructions → Chapter |
| q | Tightening torque for wheel bolts → Chapter |
| q | Anti-theft wheel bolt → Fig. |
| 7 - | Adapter for wheel bolt |
| q | Attach to corresponding wheel bolt → Fig. |
| 8 - | Cap |
| q | Attach to wheel bolt |
| 9 - | Two-piece wheel bolt |
| q | Observe the fitting instructions → Chapter |
| q | Tightening torque for wheel bolts → Chapter |
| 10 - | Trim cap |
| 11 - | Cap for wheel bolts |
| 12 - | Adhesive balancing weights |
| q | Not more than 60 g permitted per rim |
| q | Remove dirt and grease from wheel rim at bonding point |
| q | Pull off backing foil |
| q | Bond on balancing weights at surfaces provided for this purpose |
