A4 Mk2
|
|
| -DH 009 100 A2- | ||
| -LSE 020 100 A3- |
These light alloy wheels are fitted with exchangeable trim elements. Please observe the following instructions during installation. |
t | Make sure that the bonding surfaces in the light allow wheel and on the trim element are free from dust and grease. |
t | Clean bonding surfaces with silicone remover -LSE 020 100 A3-. |
– | Apply 1-component window adhesive -DH 009 100 A2- to bonding surface -arrows- using hand-cartridge gun -V.A.G 1628-. |
l | Spot of adhesive: length = approx. 25 mm and width = approx. 10 mm |
– | Press trim element -2- firmly onto light alloy wheel -1-. |
– | Secure trim element -2- on inside of light alloy wheel with lock washers -3-. |
Minimum drying time: 3 hours (ambient temperature at least 15 °C) |
WARNING
|