audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing contact sensor for rear exterior door handle -G417-/-G418- > < Removing and installing exterior door handle

A4 Mk3

Removing and installing trim for exterior door handle
Removing and installing trim for exterior door handle
On vehicles without Keyless Entry system, a trim is fitted instead of the door handle contact sensor.
   
Removing
–  Remove exterior door handle.
–  Prise out trim -2- for exterior door handle using an awl -1- at point indicated in illustration -arrow-.
–  Pull trim for exterior door handle out of exterior door handle -3-.
Installing
Installation is carried out in the reverse order; note the following:
–  Push in trim for exterior door handle until it engages audibly.
–  Install exterior door handle.
–  Install housing → Chapter.
  A57-10317

Removing and installing contact sensor for rear exterior door handle -G417-/-G418- > < Removing and installing exterior door handle