audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing trim (bottom) for steering column switch module > < Removing and installing trim cover for instrument cluster

A4 Mk3

Removing and installing trim (top) for steering column switch module
Removing and installing trim (top) for steering column switch module
   
Removing
–  Move steering wheel down and to rear as far as possible, using full range of steering column adjuster.
–  Use a small flat screwdriver to carefully unclip trim cover -2- from trim (top) -1- for steering column switch module -arrow A-.
–  Turn steering wheel 90° to one side from straight ahead position.
–  Use a small flat screwdriver to carefully prise trim (top) off trim (bottom) -3- for steering column switch module -arrows B-.
–  Disengage trim (top) at trim (bottom) for steering column switch module and detach.
  A68-10160
Installing
Installation is carried out in the reverse order; note the following:
–  Start by engaging trim (top) -1- in trim (bottom) -arrows A-.
–  Make sure that lug on trim (bottom) engages in recess at retaining tab on trim (top) -arrows B-.
  A68-10310

Removing and installing trim (bottom) for steering column switch module > < Removing and installing trim cover for instrument cluster